Description
- Black wire: GND
- Black wire : GND
- Red wire : +12V (between 10V and 13V)
- Red wire : +12V (between 10V-13V)
Specification:
Note:The red wire is connected to the positive pole, the black wire is connected to the negative pole, the positive and negative poles are strictly forbidden to be reversed, the wrong connection will burn the driver board.
brushless motor with built-in drive board, with 100 lines of encoder feedback, equivalent to a miniature servo brushless motor, model 24H055M020, it uses imported NSK ball bearings, rare earth medium strong magnetic inner rotor, with pulse frequency regulation (1000HZ-26000HZ range valid), can be forward and reverse, with electronic brake, with full function. Fully functional.
=========================================
Yellow line : PWM, pulse frequency 16000HZ-26000HZ
Blue wire :Start/Stop , start when connected to positive terminal, stop when disconnected.
White wire :Electronic brake, release when overhanging, brake when connected to GND.
Green wire : direction. Steering CW when overhanging, CCW when connected to positive terminal.
The other three lines are +3.7V and +3.7V, and the second is the signal output.
Black wire: GND
Black wire : GND
Red wire : +12V (between 10V and 13V)
Red wire : +12V (between 10V-13V)
===========================
Package List:
Motor x 1PCS
We do not know the correct way to use this motor. We connect the motor according to the above wiring method and the motor runs normally, but as for the wiring of the feedback signal, we do not know it. Please only buy if you know how to use it. Thank you!
Motor outer
Diameter: 41.9 MM
Motor height: 34 MM
Motor shaft diameter: 6 MM (with flat position 4.5 MM)
Output shaft length: 16.5 MM
Motor weight: 118 g
Voltage : DC12V
Maximum speed : 3900 RPM
Cable length : 100 MM (cable is supplied)
The red wire is connected to the positive pole, the black wire is connected to the negative pole, the yellow wire is inputted with a pulse frequency of 16000HZ-26000HZ, then the bl