Description
- 40AX2 Dual Way Bidirectional Brushed Speed Controller ESC 54x48mm Mixed Control 6v-15v for Metal Track Tank/Dual Motor Ship
40AX2 Dual Way Bidirectional Brushed Speed Controller ESC 54x48mm Mixed Control 6v-15v for Metal Track Tank/Dual Motor Ship Specifications: Adapted voltage 6v-15v (Do not use high voltage, 5 / 6S may burn in seconds) Can use 795 775 540 550 380 390 high current motor Current: single forward 40A, reverse 20A How to identify the forward and reverse direction 1) The throttle channel of the receiver is changed to the steering gear. When pushing the oil, the steering gear rotates counterclockwise when viewed from top to bottom. 2) Also use our shop's PWM tester to plug in the receiver for testing, and the increase in the fuel value is positive) The midpoint of the remote controller is fixed at PWM 1500us (+50 -50), and the run is automatically adjusted from 900-1100 and 1900-2100. Start with the midpoint (one beep at power-on, and two beeps at midpoint 1500, ESC will start) With out-of-control protection (lost signal (in the accident, the signal line was disconnected)), for safety and motor protection, you need to return the throttle to the center and unlock again Power-down protection: power supply voltage is lower than 4V, ESC restart protection (such as: high current discharge, poor performance battery voltage drop is too large, ESC protection, motor stops after protection, and battery voltage recovers after motor stops Back to the midpoint, you hear the motor unlock again) bec output 5v max 3A to meet your needs for receiving and steering gear power supply Overheating protection (overheating 90 degrees, the ESC stops output, and recovers after cooling down) Notes: 1) The left and right motor wires marked in the picture (easy to distinguish), the motor must not be confused, otherwise the ESC may burn in seconds 2) Overheating protection takes effect only when both circuits are used. Otherwise, it is difficult to take effect if only the single circuit is used to regulate the uneven heating and c